Removing the tow point cover before installation, most of the cover can be removed by pushing in or pried. Only some special vehicles' tow point is covered by the bumper grille. In this case, the grille will need to need to be removed, or modification of hole drilling may be required.
Clean up the tow point before inserting the Tow Hook Adaptor Bolt (5) and tighten with 17MM wrench (Max 60LB/FT & do NOT use air tool). Some vehicles contain left-hand threadtow bolt.
Place the rubber washer (4) in between of the oval Shape Adaptor (2) and Tow Hook Bolt (5), *7MM Spacer (3) is optional*. Then use the Hex Wrench (7) slightly tight down the Long M8 Screw (8). DO NOTplace the rubber washer (4) between the Long M8 Bolt (8) & Oval Shape Adaptor (2)...
- Compatible with both PDC(Parking Distance Sensors) or Non-PDC Model
The full-size mount bracket can prevent the license plate from being grabbed or bent by automatic car wash brushes or any other external force.
EOS Tow Hook License Plate provides you with a solution to install the front license plate without drilling holes on the front bumper. Our products are made of high quality T6061 Aircraft Aluminum, and the unique design of our mounting bracket provides you with multiple mounting locations for attachment. You will able to install the item without any modification of your vehicle.
MULTIPLE ADJUSTMENT ANGLES & POSITIONS
A series of modular spaces which allow you to adjust its mounting point to the left or right. The function of these spaces is critical for you to be able to move your license plate away from headlights or fog lights.